Photo enthusiasts! Time for another lesson! Are you excited yet?!?!
This week, let’s focus on shutter speed. The term is much simpler than all the other ones I’ve thrown at you, I think. 😉 Shutter speed is simply how long the shutter allows light into the camera – the speed at which it opens and closes. It actually requires a lot of technology to get the shutter to work at such high speeds, but I won’t get into that here. What you need to know is that shutter speed is measured in fractions of a second. Anything longer than 1/60 of a second is considered “slow” in photography terms, and “fast” is anything above 1/500 of a second. So, the picture I took above is just bordering on fast.
What’s the point? When there is any kind of action or movement in your photos, your shutter speed setting will determine how much “blur” is in your pictures. Fast shutter speeds will freeze the action (if you look closely, you can see some stray water droplets around the pot in the photo), while slow shutter speeds will blur movement (here’s one I did with a moving subject). Pick your shutter speed depending on what you want to do with the photo – do you want to stop the action or show it? There’s just one rule here: when hand-holding your camera, realize that some shutter speeds may be too low to get sharp images. Anything slower than 1/60 should use a tripod. Also, it should be equal to or faster than the focal length of your lens. So, if I’m using my 70 mm lens, my shutter speed should not be lower than 1/70 sec unless I have a tripod.
Ok, now it’s your turn! Check your camera presets (some explanations here and here) and go to Tv (shutter priority) mode if your camera allows. If you live near a waterfall or fountain, you’re lucky. For the rest of us, use your shower or sink faucet. Try adjusting your shutter speed while taking pictures of the water. What kind of effects can you get?
Try it! Then comment and let us know what your favorite results were.